Download checklist PDF file

Download checklist Word file

---

LTS PROJECT CHECKLIST

PROJECT INFORMATION
CLIENT NAME:		DATE:
CLIENT REP:		CLIENT PHONE:
CLIENT E-MAIL:		CLIENT FAX:
STATE OF PROJECT:		PROJECT NAME:
DATE FIRST SUBMITTAL DRAWINGS ARE REQUIRED:
STRUCTURAL CALCULATIONS: PE OR SE STAMP:
ARE STRUCTURAL CALCULATIONS REQUIRED FOR THE FIRST SUBMITTAL? :

ALUMINUM MANUFACTURER

FINISH

STOREFRONT SYSTEMS – PROVIDE SIGHTLINE & PROFILE DIMENSIONS

CURTAIN WALL SYSTEMS – PROVIDE SIGHTLINE & PROFILE DIMENSIONS

DOORS – PROVIDE SERIES & DEPTHS

WINDOWS – PROVIDE SERIES & DEPTHS

STOREFRONT SYSTEMS

GLAZING OPTIONS
INSIDE GLAZE	OUTSIDE GLAZE	OTHER:

SYSTEM PLANE OF GLASS
CENTER PLANE	FRONT PLANE	BACK PLANE	MULTIPLANE

FABRICATION METHOD
SCREW SPLINE	SHEAR BLOCK	CAN SYSTEM
SILL FLASHING PROVIDE SILL FLASHING PART NUMBER:	SET ON R.O. SHIM OFF R.O. – DIMENSION:
HEAD RECEPTOR PROVIDE HEAD RECEPTOR PART NUMBERS:	SET ON R.O. SHIM OFF R.O. – DIMENSION:

BRAKE METAL

REQUIRED:

BRAKE METAL THICKNESS:

DO YOU REQUIRE A SEPARATE BRAKE METAL DETAIL SHEET?

BRAKE METAL WITHIN OR AROUND STOREFRONT (EXPLAIN):

SPECIALTY ITEMS

EXPANSION VERTICAL MULLIONS:

VARIABLE PIVOT / SPLAYED MULLIONS:

GLAZING ADAPTORS:

CUSTOM DIES:

VINYL FILLER AT PERIMETER LOCATIONS:

ALUMINUM FILLER AT PIREMETER LOCATIONS (REQUIRED AT ANCHORS):

SEALANT INFORMATION
CAULK JOINT DIMENSION:
HEAD	JAMBS	SILL
EXTERIOR SEALANT BY WHOM:
INTERIOR SEALANT BY WHOM:
TYPE OF SEALANT:

STEEL REINFORCEMENT INFORMATION

INTERNAL STEEL - MANUFACTURES STANDARD STEEL SHAPES:

INTERNAL STEEL - AVAILABLE STANDARD STEEL SHAPES:

STEEL ANCHORS - BENT PLATE ANGLES:

STEEL ANCHORS – STANDARD STEEL ANGLES:

CURTAIN WALL SYSTEMS

INSTALLATION METHOD
OUTSIDE GLAZE	INSIDE GLAZE	OTHER:

ERECTION METHOD
STICK SYSTEM	UNITIZED SYSTEM	I-BEAM SYSTEM
OTHER

ATTACHMENT METHOD
SHEAR BLOCK	SCREW SPLINE

SYSTEM INFORMATION
SIGHTLINE DIMENSION:
DEPTH:
CENTER TONGUE:	OFFSET TONGUE
ONE PIECE HORIZONTAL:	ROLL OVER HORIZONTALS
TWO PIECE VERTICAL MULLIONS:
INTERNAL STEEL (LOCATION AND WHAT SIZE?):
EXPANSION SPLICE:
HARD SPLICE:
SUBFRAMES AT DOORS:
DEPTH OF FACE COVER:
STOCK LENGTH SIZE REQUIRED:

SPECIALTY ITEMS
SSG VERTICALS		SSG HORIZONTALS		PERIMETER SSG
4-SSG		SSG CORNERS		CAPTURED CORNERS
SPLAYED MULLIONS:
LARGER SIGHTLINE ONE PIECE MULLIONS:
LARGER SIGHTLINE ONE PIECE PRESSURE PLATE AND COVER:
GLAZING ADAPTORS REQUIRED:
DIMENSION OF REQUIRED ADAPTORS:
CUSTOM DIES:
SUNSHADES:
OTHER:
ANCHORING METHOD:
T&F	SHEAR BLOCK ANCHOR		PERIMETER F		CUSTOM CLIPS

STEEL REINFORCEMENT INFORMATION

INTERNAL STEEL - MANUFACTURES STANDARD STEEL SHAPES:

INTERNAL STEEL - AVAILABLE STANDARD STEEL SHAPES:

ANCHORS - BENT PLATE ANGLES:

ANCHORS – STANDARD STEEL ANGLES:

REV NUTS:

TAPPING PLATES:

BRAKE METAL

REQUIRED:

BRAKE METAL THICKNESS:

DO YOU REQUIRE A SEPARATE BRAKE METAL DETAIL SHEET?

BRAKE METAL WITHIN OR AROUND CURTAIN WALL (EXPLAIN):

SEALANT INFORMATION
CAULK JOINT DIMENSION:
HEAD	JAMBS	SILL
EXTERIOR SEALANT BY WHOM:
INTERIOR SEALANT BY WHOM:
TYPE OF SEALANT:

DOORS

DOOR SIGHTLINES
NARROW	MEDIUM	WIDE	OTHER:

DOOR PROFILE
BOTTOM RAIL DIMENSION:
TOP RAIL DIMENSIONS:
MIDRAIL DIMENSION:
MIDRAIL LOCATION – DIMENSION FROM FINISHED FLOOR:
THRESHOLD HEIGHT:
1” GLASS STOPS	¼” GLASS STOPS	OTHER
SQUARE GLASS STOPS	BEVELED STOPS	OTHER
1 ¾” DOOR DEPTH	2” DOOR DEPTH	2 ¼” DOOR DEPTH
IF REFLECTIVE OR TINTED GLAZING AROUND THE DOOR, ARE THE DOOR LITES TO BE CLEAR?
OTHER:

DOOR FRAMES
TUBULAR	OPEN BACK
FACTORY FABRICATED IMMEDIATE DOOR FRAMES:
CUSTOM BUILT DOOR FRAMES (STD. VERTICAL MULLIONS WITH SNAP IN STOP):
SHEAR BLOCK		SCREW SPLINE
EXTRUDED STOPS		APPLIED DOOR STOPS	INSERT DOOR STOPS
NON-THERMAL		THERMAL
1 ¾” FRAMES		2” FRAMES	CURTAIN WALL SUBFRAMES
TRANSOM FRAMES		NON-TRANSOM FRAMES
CRIPPLED DOOR FRAMES

HARDWARE

PROVIDE APPROVED HARDWARE SCHEDULE TO LTS:

WINDOW SYSTEMS

WINDOW SYSTEM
PROJECT IN	PROJECT OUT	CASEMENT
HORIZONTAL SLIDING	SINGLE HUNG	DOUBLE HUNG
VERTICAL PIVOT	HORIZONTAL PIVOT	FIXED
CONCEALED VENT	TOP HING OUT	TOP HINGE IN

GLAZING METHOD
INSIDE GLAZE	OUTSIDE GLAZE

ATTACHMENT METHOD
SUBSILL	SET ON R.O.	SHIM OFF R.O. – DIMENSION:
HEAD RECEPTOR	SET ON R.O.	SHIM OFF R.O. – DIMENSION:
JAMB RECEPTOR	SET ON R.O.	SHIM OFF R.O. – DIMENSION:
SILL FLASHING
ALCO SILL OR SILL EXTENSION:
PANNING SYSTEM:
INTERIOR TRIM:
STRAP ANCHOR ATTACHMENT:
TWIST ANCHOR ATTACHMENT:

INSTALLATION PROCESS
VERTICAL STACK JOINT	HORIZONTAL STACK JOINT

WINDOW MULLIONS

VERTICAL MULLION (PROVIDE PART NUMBER(S):

HORIZONTAL MULLIONS (PROVIDE PART NUMBER(S):

GRID SYSTEMS
EXTERIOR GRIDS	INTERIOR GRIDS	INTERNAL GRIDS
GLAZED IN GRIDS	APPLIED GRIDS
PROVIDE EXTRUSION NUMBER(S):

SCREENS
ALUMINUM	FIBERGLASS	STAINLESS STEEL
FIXED	WICKET	FULL HINGE WICKET
SLIDING
FINISH:

WINDOW HARDWARE
4-BAR HINGES	BUTT HINGES		UNDER SCREEN PUSH BAR
STD. BLOCK & TACKLE BALANCES
SPIRAL BALANCES
ULTRA LIFT BALANCES
LIMIT STOPS (SET TO WHAT DIMENSION OR DEGREE?):
STD. CAM LOCKS		POLE RING CAMS		A.C. LOCKS
LIFT LOCKS		2 POINT LIFT LOCKS		KEYED RELEASE LIMIT STOPS
SWEEP LOCKS		PUSH/PULLS		ARE PULLS REQUIRED?

SEALANT INFORMATION
CAULK JOINT DIMENSION:
HEAD	JAMBS	SILL
EXTERIOR SEALANT BY WHOM:
INTERIOR SEALANT BY WHOM:
TYPE OF SEALANT:

GLASS SCHEDULE

A:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

B:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

C:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

D:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

E:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

F:

EXTERIOR LITE:

AIR SPACE:

INTERIOR LITE:

DESIGN CRITERIA AND DRAWING INSTRUCTIONS

DESIGN CRITERIA

CODE/STANDARDS:

WIND SPEED:

IMPORTANCE FACTOR:

EXPOSURE CATEGORY:

BUILDING HEIGHT:

LIVE LOAD:

SEISMIC LOAD:

SNOW LOAD:

DEFLECTION:

DOD OR GSA:

IMPACT:

SHOP DRAWING LAYOUT

COVER SHEET

DOOR HARDWARE SHEET

WINDOW HARDWARE SHEET

FLOOR PLANS

ELECTRONIC FLOOR PLANS ARE REQUIRED FOR RADIUS PLAN DIMENSIONS.

ELEVATION SHEETS

LEVEL I – DETAIL SHEETS - GENERIC HATCH PATTERN AS THE PERIMETER CONDITION:

LEVEL II – DETAIL SHEETS - COMPLETE DETAILS (PERIMETER CONDITIONS TO BE DRAWN BY LTS):

LEVEL III - PERIMETER FASTENERS REQUIRED

NOTE: IF PERIMETER FASTENERS ARE REQUIRED ADDITIONAL CHARGES APPLY

LEVEL IV - STRUCTURAL CALCULATIONS:

NOTE: STRUCTURAL CALCULATIONS SHALL BE SUBMITTED ONLY AFTER RECEIPT OF APPROVED SHOP DRAWINGS.

COPIES

ELECTRONIC FILES E-MAILED IN A PDF FORMAT

REPRODUCIBLE DOCUMENTS REQUIRED / HOW MANY SETS:

NOTE: IF REPRODUCIBLE DOCUMENTS ARE REQUIRED ADDITIONAL CHARGES APPLY

SHALL LTS RETURN THE CONTRACT DOCUMENTS AFTER THE FIRST SUBMITTAL DRAWINGS HAVE BEEN DELIVERED: